A general purpose treatment for total protection against scale and corrosion in all types of indirect central heating systems, including those containing aluminium. Will extend the life of the system, and ensure maximum efficiency and minimum fuel usage. Once added, Guardian G1000 never needs to be replaced unless the system is drained down.
Check out the Guardian G1000 Inhibitor Experiment
Application:
G1000 is a class A inhibitor to combat corrosion, scale & boiler noise.
An existing system should be cleaned and flushed in accordance with BS7593:2006 using G4000 system sludge & scale remover.
Guardian G1000 is suitable for use in all waters, both hard and soft. The formulation is completely non-toxic.
Dosage:
G1000 should be dosed at 0.5% of the system volume. 500ml per 100 litres of system water. One litre of G1000 is sufficient to treat a typical 50,000 btu system. Extra volume is required for larger systems. Overdosing does not present a problem.
Instructions:
Open System: Add the G1000 via the expansion tank having drained off a sufficient volume to ensure the entire product enters the system.
Sealed Systems: If the system is empty add via a convenient fill point. If the system is full add using a SUREFLUSH dosing pump or similar via a suitable connection point.
PHYSICAL AND CHEMICAL PROPERTIES
Form – Liquid
Colour – Straw
Odour – Mild Aromatic
Solubility – Soluble in cold and hot waterPH Value – 8
Product Highlights
- Prevents boiler noise
- 500ml is sufficient to treat a typical 50,000btu system
- Helps to improve efficiency and conserve energy
- Acts as a multi-metal inhibitor against scale corrosion
- Easy to use
- Can be used with Sureflush dosing pump or similar system
- Build cert Approved
